Filter
Top Products
77
EN
Display
1 In stop mode, press [SETUP]. Select
“General Setting” using [U \ D],
then press [ENTER].
2 Select “Display” using [U \ D], then
press [ENTER].
3 Select the desired item using
[U \ D], then press [ENTER].
4 Refer to 1. to 3. on this page and set
the selected item.
5 When you finish with the setting,
press [SETUP] to exit.
1. OSD Language (Default: English)
Set the OSD language.
Select a language using [U \ D],
then press [ENTER].
2. Screen Saver (Default: 10 minutes)
Set the screen saver time delay.
Select a setting using [U \ D], then
press [ENTER].
Your setting is activated.
3. FL Dimmer (Default: Bright)
Set the front panel display brightness.
Select a setting using [U \ D], then
press [ENTER].
You can choose one from “Auto”, “Bright” or
“Dark”.
If “Auto” is selected, the display gets dark when
the power is off.
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
General Setting
1
2
3
OSD Language
Screen Saver
FL Dimmer
OSD Language
✔
English
Français
Español
Deutsch
Italiano
Svenska
Nederlands
Screen Saver
OFF
5 minutes
10 minutes
15 minutes
30 minutes
FL Dimmer
Auto
Bright
Dark
Introduction Connections Basic Setup Playback Editing OthersFunction SetupRecording VCR Functions
E3LG0ED_EN.book Page 77 Wednesday, April 30, 2008 11:52 AM