Filter
Top Products
28
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 42/50HP95 *web 213:276
Using the remote control
3
Note: The error message “Not
Available” will appear if you press a
key for a function that is not available
The buttons used for operating the TV only are described here. For a
complete list of the remote control’s functions, see the remote control
functional key chart on pages 31–32.
For a list of the buttons that operate the TV Guide On Screen
™
system, see
page 56.
POWER
turns the TV on and off.
SLEEP
accesses the sleep timer (page 93).
LIGHT
The first press of the LIGHT button lights the keypad and turns on
the Illumination mode. With the Illumination mode on, pressing any other
key lights the keypad for 5 seconds (10 seconds if you’re in programming
mode). Subsequent presses of the LIGHT button toggle between turning
the Illumination mode on and off.
Channel Numbers (0–9, –/100)
directly tune channels. The “–” button is used
to tune digital channels (page 73) or to display the favorite channel list
(page 46).
INPUT
selects the video input source (page 69).
MODE
cycles through the six device modes: TV, CBL/SAT, VCR/PVR,
DVD, AUDIO1, and AUDIO2. The mode indicator light will remain lit
for a few seconds (page 30).
PIC SIZE
cycles through the five pictures sizes: Natural, TheaterWide 1/2/3,
and Full (page 74).
TheaterNet™ DEVICE
displays a list of available TheaterNet devices (page 48).
TheaterNet™ CTRL
accesses the on-screen IR device control icons (page 48).
MENU
accesses the main TV menu system (pages 37 and 38) or opens a
menu in the TV Guide On Screen
™
system (Chapter 7).
TV GUIDE
opens the TV Guide On Screen
™
system (Chapter 7).
INFO
provides detailed information on highlighted items in the TV Guide
On Screen
™
system (Chapter 7).
ENTER
activates highlighted items in the main menu system and the
TV Guide On Screen
™
system.
Arrow buttons (yz x •)
When a menu is on-screen, these buttons select or
adjust programming menus. (Also see
x / • on the next page.)
CH yz
cycles through programmed channels when no menu is on-screen
(page 44); functions as page up/down when a menu is on-screen or when
the TV Guide On Screen
™
system is open (Chapter 7).
VOL yz
adjusts the volume level.
EXIT
closes on-screen menus and the TV Guide On Screen
™
system.
Learning about the remote control
#01E_028-036_4250HP95 05.9.12, 10:06 PM28
Black