Filter
Top Products
5
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 42/50HP95 *web 213:276
Important notes about your Plasma TV
The following symptoms are not signs of malfunction,
but rather technical limitations of plasma TV
technology.
1) The display of this Plasma TV radiates infrared rays. It may
affect other infrared communication equipment under
certain operating conditions.
2) Under certain conditions, the display of this Plasma TV
may cause interference with the audio and/or video of
certain types of electronic equipment that easily receive
electromagnetic waves (e.g., AM radios and video
equipment). In particular, the display of this Plasma TV
may affect certain types of electronic equipment that are
located beyond the area where the Plasma TV is being
used.
3) The display panel of this Plasma TV is manufactured using
an extremely high level of precision technology. However,
occasionally some parts of the screen may be missing
picture elements and/or have luminous spots.
4) You can enjoy playing video games on this Plasma TV.
However, certain video games that utilize so-called “light
gun” joysticks for shooting at on-screen targets may not
work with this Plasma TV.
5) Possible Adverse Effects on Plasma Display
Like all phosphor-based display devices and all gas-based
plasma displays, the display of this Plasma TV may be
susceptible to permanent ghost images (also known as
phosphor burn-in) under certain circumstances. Certain
operating conditions may accelerate the potential for
phosphor burn-in, including but not limited to the
following:
• Displaying fixed (non-moving) images, including but
not limited to PIP/POP windows, closed captions, video
game patterns, TV station logos, stock tickers, and
websites.
FCC Declaration of Conformity Compliance Statement (Part 15):
• Displaying special formats that do not use the entire
screen, including but not limited to widescreen or
letterbox format media viewed on a 4:3 aspect ratio
display (with gray or black bars at the top and bottom of
the screen) and 4:3 aspect ratio format media viewed on
a widescreen/16:9 aspect ratio display (with gray or
black bars on the left and right sides of the screen).
To minimize the potential for the occurrence of phosphor
burn-in, Toshiba recommends the following:
• Display a moving image on the display of your Plasma
TV whenever possible.
• Always turn off the power of your Plasma TV when you
are finished using it.
• Reduce the Brightness and Contrast levels as much as
possible without impairing image quality.
• Enable the Long Life settings (see page 94).
• Try to display images that have many colors and color
gradations (i.e., photographic or photo-realistic images).
• Try to display images that have minimal contrast
between light and dark areas (e.g., avoid white
characters on black backgrounds).
• Try to avoid displaying images that have few colors and/
or that have distinct, sharply defined borders between
colors.
About the Sticking Image Protection feature
This TV contains a “Sticking Image Protection” feature that
automatically starts to decrease the picture brightness in
small increments when a fixed (non-moving) image is
displayed on-screen for an extended period of time. This
feature helps to reduce and delay the potential for phosphor
burn-in. The time delay and rate of decreasing picture
brightness depend on the brightness of the displayed image.
The Toshiba 42HP95/50HP95 Plasma Color
Televisions comply with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference that may cause
undesired operation.
The party responsible for compliance to these rules is:
Toshiba America Consumer Products, L.L.C.
82 Totowa Rd. Wayne, NJ 07470.
Ph: (973) 628-8000
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by removing
and applying power to the equipment, the user is encouraged to try
to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the
receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION: Changes or modifications to this equipment not
expressly approved by Toshiba could void the user’s authority to
operate this equipment.
#01E_005-007_4250HP95 05.9.12, 10:05 PM5
Black