Filter
Top Products
19
3. Press . The remote will send the command for the function you pressed in step 2.
4. If the device performed the function you pressed, press OK. The remote will now
control the device you selected in step 1. If the device did not perform the function
you pressed, repeat step 3. Press to retry the previous code.
Checking Codes
1. Press and hold a device key (AUDIO, DVD/VCR or TV) for at least six seconds. The LED
for each device key lights up momentarily and the key for the device you selected
remains on.
2. Enter 9-9-0 to tell the remote you are verifying the device code. The LED blinks twice.
3. Press 1, then count the number of times the LED blinks and write down the
number. (If the LED does not blink, the number is 0.) This is the first digit of the
device code. Press 2, 3 and 4 to obtain all four digits of the device code.
Tip: Write down the code that worked, in case you must re-code your remote.
Changing Volume Lock
Locking the volume controls to a single device makes it easier to control volume
without having to guess whether the volume will change. If you lock the remote’s
volume controls to the TV (for example), you will always be able to change the volume
to the level you want, without having to adjust it on multiple devices.
1. Press and hold the device key (TV, AUDIO, DVD/VCR or CABLE) for six seconds.
The LED for each device key lights up momentarily and the key for the selected
device remains on.
2. Press Volume + (up).
The device key’s LED blinks three times, indicating it has locked the volume control to
the device you selected. The AUDIO device key always controls its own volume,
regardless of which device is locked to volume control.
NOTE: If you reassign AUDIO to another device, such as a second TV, the second TV
will always control its own volume.
Unlocking Volume Control
1. Press and hold the device key (TV, AUDIO, DVD/VCR or CABLE) corresponding to
the device currently locked to the volume control for at least six seconds. The LED
for each device key lights up momentarily and the key for the selected device
remains on.
2. Press Volume – (down).
The device key’s LED blinks three times, indicating it has unlocked the volume control
for all devices.
DVD/VCR TV AUDIO