Filter
Top Products
20
Reassigning Device Keys
Each device key accesses a specific type of device (for example, the DVD/VCR
key can only be programmed to control a DVD player, VCR, DVR or HTS). This
makes it easier to search for a code if your device’s code does not appear on
the list provided.
Your new remote allows you to change the type of device that may be assigned
to a device key. That way, if you have two TVs, for example, you can control
them both by changing the type of device the DVD/VCR or AUDIO key controls.
1. Press and hold the device key (TV, AUDIO, DVD/VCR) that corresponds to the
device you want the reassigned key to control (for example, TV) for six
seconds. The LED for each device key lights up momentarily and the key
for the selected device remains on.
2. Enter 9-9-2.
3. Press the device key you want to reassign (for example, AUDIO). That key’s
LED blinks three times and turns off, indicating that it has been reassigned.
The reassigned key automatically uses the same device code as the key you
selected in step 1. If your second device uses a different code, you may
program it for the new code. (See Programming Device Control.)
NOTE: You may not reassign the CABLE device key to another type of device.
Assigning a key back to its original device type:
1. Press and hold the device key (TV, AUDIO, DVD/VCR) you want to reset to its
original type (for example, AUDIO) for at least six seconds. The LED for each
device key lights up momentarily and the key for the device you selected
remains on.
2. Enter 9-9-2. The device key LED blinks three times and turns off.
3. Press the device key you selected in step 1 again. The LED blinks three times
and turns off.
4. Program the restored key to control a device. (See Programming
Device Control.)
Installing Batteries
Your remote requires two AAA batteries. The first set of batteries is included and
should last up to six months under normal usage.
1. Remove the battery case cover and the old batteries (if necessary).
2. Follow the diagram inside the battery case to insert the new batteries.
NOTE: You have 10 minutes to replace the batteries before the remote loses memory.
Operating Range
Your remote controls devices from up to 50 ft. (15 m) away if you are directly in
front of the device or from up to 20 ft. (6 m) away if you are off to either side.