Filter
Top Products
VlZlOSV420XVT1AUserManual
Connectlnq an e×temna[ Receiver/Rmp
1.
2.
3.
4.
8.
6.
7.
Turn offthe power to the LCD HDTV and Receiver/Amp.
Using an audio cable (white and red connectors), connect the
cable to the audio input connectors on the Receiver/Amp and
connect the other end to the ANALOG OUT (white area)
audio connectors at the rear of the LCD HDTV.
Turn on the power to the LCD HDTV and Receiver/Amp.
Then press the MENU button on the remote control to open
the On-Screen Display (OSD) menu.
Press ? button on the remote control to select the Audio
menu.
Press _ on the remote control to select SPEAKERS.
Press _ on the remote control to select OFF so that the
sound from the LCD HDTV will now be routed through your
Receiver/Amp system.
2oB l Optica[ Output of Rodio receipted with HO
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical
DIGITAL AUDIO OUT (white area) at the rear of the LCD HDTV. This is active when receiving audio with
the programs being viewed no matter what input is being used.
Version 6/2/2008 29
www,VlZlO.com