Filter
Top Products
VlZlO SV420XVT1A User Manual
SVA2oXVTIR are sold separatetv
Wall Mounts
High Definition Cables
Extra or replacement Remote
VlZlO also offers Installation Services and Extended Warranty Services for your VlZIO SV420XVT1A
To purchase or inquire about additional accessories and services for your VlZlO product, visit our web
site at www.vizio.com or call us toll free at 888-VlZlOCE (888-849-4623)
InstalLation Preparation
Please read this user manual carefully before installing your VlZlO HDTV.
The power consumption of the TV is about 400W; please use the power cord designated for TV. When
an extension cord is required, use one with the correct power rating. The cord must be grounded and the
grounding feature must not be defeated.
The TV should be installed on a flat surface to avoid tipping. For proper ventilation, you must allow space
between the back of the TV and the wall. If you would like to mount your TV on the wail, please see
below 'Preparing Your LCD HDTV for Wail Mounting' for additional information. Avoid installing the TV in
places with high humidity, dust or smoke so as not to shorten the service life of the electronic components.
Install the TV in landscape orientation; any 90 ° clockwise or counter-clockwise installation may induce
poor ventilation and excessive component damage.
VlZIO offers professional installation services. Please contact VlZlO for more information on these
services at 888-VlZlOCE (888-849-4623) or www.vizio.com.
Rbbschinq bhe Ss ety Sb£sp
For when the SV420XVT1A is not mounted on the wall with a Wall Mount, a Safety Strap has been
included to attach the HDTV to the waIi to reduce the chance of the HDTV being pulled over. The Safety
Strap should be used with common sense practice such as ensuring that children (or adults) do not climb
up, grabbing the top of the HDTV and pulling it onto themselves.
1.
Fix one end of the strap to the wall. If you have a drywall
finish it is preferable to fix it to a stud, using a washer
underneath the screw head. If you have a solid wall you
should use a lag bolt, again using a washer under the nut.
2.
Fix the other end of the Safety
Strap to one of the upper wall
mounting holes on the back of
the HDTV, using a washer
under the screw head.
Version 6/2/2008 5
www,VlZlO.com