Vizio SV420XVT1A Flat Panel Television User Manual


 
VlZlO SV420XVT1A User Manual
Proqramminq bhe VJ£10 Universat Remote Conbrot
You can program the remote control to work with up to four different pieces of equipment including your
VIZlO SV420XVT1A. Listed below are the steps for programming your VCR, Cable Box and DVD Player.
q, 174 Proqrammir q for VER
1. Manually turn on the VCR.
2. Press the VCR button on the remote control.
3. Press and hold the SET button until the LED LIGHT flashes twice.
4. Find the programming code for your VCR in the code list in the back of this book and enter it using
the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component
and manufacturer.
5. Point the remote control at the VCR and press the POWER button. The VCR wil! turn off.
4o17oS P -oqrammimq Cabte SetoTop Box
1. Manually turn on the Cable Box.
2. Press the CBL button on the remote control.
3. Press and hold the SET button until the LED LIGHT flashes twice.
4. Find the programming code for your Cable Box in the code list in the back of this book and enter it
using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is
entered.
if the LED does not flash twice, repeat Steps 2 through 4 with the next code tisted for the component and
manufacturer.
5. Point the remote control at the Cable Box and press the POWER button. The Cable Box will turn off.
if the LED does not flash twice, repeat Steps 2 through 4 with the next code tisted for the component and
manufacturer.
Version 6/2/2008 75
www,VlZlO.com