Vizio SV420XVT1A Flat Panel Television User Manual


 
VlZlOSV420XVT1AUserManual
Ehapter 5 Maintenance and Troubteshoobinq
S01 Maimbenance
1.
2.
Make sure that the power cable is removed from the socket before cleaning the TV.
Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the TV. Such
chemicals may damage the housing, screen glass and remote control, and cause paint to
peel.
CLeaninq the Housinq and Remote Control
1.
2.
Use the VlZlO soft cloth for cleaning.
If the housing or remote control is seriously contaminated, use a soft cloth moistened with
diluted neutral cleaner to clean the display. Wring water out of the cloth before cleaning to
prevent water from penetrating into the housing. Wipe the display with a dry cloth after
cleaning.
Eteaninq the Screen
1.
2.
Use the VIZlO soft cotton cloth to gently clean the screen.
The screen glass is very fragile. Do not scrape it with any sharp object. Do not press or tap
the screen to avoid cracking. When the screen is seriously contaminated, use a soft cloth
moistened with diluted neutral cleaner to clean the display. Wring water out of the cloth
before cleaning to prevent water from penetrating into the housing. Wipe the display with a
dry cloth after cleaning.
5,2 Troubleshootinq Guide
If the TV fails or the performance changes dramatically, check the display in accordance with the
following instructions. Remember to check the peripherals to pinpoint the source of the failure. If the
display still fails to perform as expected, contact the VlZIO for assistance by calling 1-877-698-4946 or
e-mail us at techsupport(_,vizio.com.
No power. Make sure the power button is ON (White VlZlO Logo).
Make sure AC power cord is securely connected to the AC socket.
Plug another electrical device (like a radio) to the power outlet to verify that the
outlet is suppIyJng the proper voltage.
No sound. Check your audio connection
Press MUTE on the remote control again, so that MUTE disappears from the screen
Check your audio settings, your TV audio may be set to SAP, min or speakers off.
Press the Volume + (Up) key on your remote control
Make sure that headphones are not connected
If the screen is black. Check your input connections.
Power is ON but no scree_
Version 6/2/2008 77
www,VlZlO.com