User Manual MobileNavigator 6
Configuring 1290HMobileNavigator 6 - 81 -
You can close settings windows in two ways:
Ù Tap on the
Done button. Any changes you have made will be
accepted.
Ù Tap on the
Cancel button. Any changes you have made will
not be accepted.
The
SETTINGS window opens again.
Options of the Settings window
The options of the SETTINGS window offer the following functions:
Option Description
Calibration
Opens a window in which you can
recalibrate the touchscreen (align it) if it
is reacting imprecisely to contact.
Product info
Opens a window in which you obtain
information about the installed software
version. You can also see the navigation
system's time here.
Factory settings
Opens a window in which you can reset
all the settings back to the factory
settings.
Note: The following explanations refer to factory settings.
9.2 Current map
The CURRENT MAP window shows which map the navigation
system is currently using.
If several navigation maps are available on the currently inserted
memory card, then you can select a different map.
1. Tap on the map's name.
A list of all the available maps opens. If the list is long, you
can move within it using the
(Up) and (Up) buttons.
2. Tap on the map you wish to use.
3. Tap on the
OK button.
The
CURRENT MAP window opens again. The new map is
entered.
Ù Tap on the
Done button. Any changes you have made will be
accepted.
Ù Tap on the
Cancel button. Any changes you have made will
not be accepted.
