TOSHIBA- 9
TX Series 48 - 1250A
Note: All wiring must be sized according to NEC standards
Remove all sources of power before cleaning the unit!
In dirty or contaminated atmospheres the unit should be cleaned on a regular
basis to ensure proper cooling. Do not use any chemicals to clean the unit. To
remove surface dust use 80 to 100 psi, clean, dry compressed air only. A three
inch, high quality, dry paint brush is helpful to loosen up the dust prior to using
compressed air on the unit.
2.5 Power Terminal Wire Range and Tightening Torque
2.6 Dimensions
ABCDEF
TX005 to TX007
16.5 10 10 15.9 9 0.28
TX008
20 20.1 12 18.5 17.5 0.44
TX009 to TX010
27 20.1 11.2 25.5 17.5 0.44
TX011 to TX013
29.5 20.1 11.5 25.5 17.5 0.44
TX014 to TX015
45 33 12.8 43.3 31.3 0.44
TX016 to TX017
33 33 15.2 31.2 31.2 0.44
PANEL
(OPEN
CHASSIS
TYPE)
TX DIMENSIONS
Overall Dimensions Mounting Dimensions
Number
Enclosure
TX005
48 10 15 30 40 11 22 #18 - #4 20
TX006
78 20 25 50 60 22 37 #14 - #2 50
TX007
120 30 40 75 100 30 55
TX008
180 50 60 125 150 55 90
TX009
220 60 75 150 200 110
TX010
288 75 100 200 250 75 132
TX011
414 125 150 300 350 200
TX012
476 - - 350 400 132 250
TX013
550 150 200 400 500 160
TX014
718 200 250 500 600 200 315
TX015
1006 300 350 700 800 400
TX016
1150 350 400 800 900
TX017
1250 450 500 1000 1125
#6 - 250 kcmil 325
(4) #2 - 600 kcmil 375
Torque
lbs/in
Range
(2) #6 - 600 kcmil 375
(2) #2 - 600 kcmil 375
(3) #2 - 600 kcmil 375
230V 400V
kW
Model
Number
Max
Amps
Max HP
208V 230V 480V 600V
C
B
F
D
E
