TOSHIBA- 25
TX Series 48 - 1250A
5.1.4 Relay Assignments (Setpoint Page 4)
1st 2nd 3rd
O/L Trip Trip Only None None
I/B Trip Trip None None
S/C Trip Trip Only None None
Overcurrent Trip Trip None None
Stator RTD Trip Trip None None
Non-stator RTD Trip Trip None None
G/F Hi Set Trip Trip None None
G/F Lo Set Trip Trip None None
Phase Loss Trip Trip None None
Accel. Time Trip Trip Only None None
Start Curve Trip Trip Only None None
Over Frequency Trip Trip None None
Under Frequency Trip Trip None None
I*I*T Start Curve Trip None None
Learned Start Curve Trip None None
Phase Reversal Trip None None
Overvoltage Trip Trip None None
Undervoltage Trip Trip None None
Power Factor Trip Trip None None
Tach Accel Trip Trip None None
Inhibits Trip Trip None None
Shunt Trip AUX3 None None
Bypass Discrepancy None None None
External Input #1 None None None
External Input #2 None None None
Dual Ramp None None None
Thermostat Trip None None
O/L Warning Alarm None None
Overcurrent Alarm Alarm None None
Ground Fault Alarm Alarm None None
Under Current Alarm Alarm None None
Motor Running None None None
I/B Alarm Alarm None None
Stator RTD Alarm Alarm None None
Non-Stator RTD Alarm Alarm None None
RTD Failure Alarm Alarm None None
Self Test Fail Trip None None
Thermal Register Alarm None None
U/V Alarm Alarm None None
O/V Alarm Alarm None None
Power Factor Alarm Alarm None None
KW Demand Alarm Alarm None None
KVA Demand Alarm Alarm None None
KVAR Demand Alarm Alarm None None
Amps Demand Alarm Alarm None None
Timed Output None None None
Run Delay Time None None None
At Speed AUX4 None None
Range Section
Factory Setting
Setpoint
Page
Security
Level
Description
Page 4
Relay Assignments
Level 2
Password Protection
None
Trip(AUX1)
Alarm(AUX2)
AUX3
AUX4
SP4.1
