TOSHIBA - 56
TX Series 48 - 1250A
SP.13 Calibration & Service (Setpoint Page 13)
(Security Level: Factory Use Only)
MENU
PAGE 13 CALIBRATION
& SERVICE
SET DATE AND TIME
##/##/## ##:##
(Hit DOWN ARROW twelve times)
ENTER DATE (DDMMYYYY)
:##/##/####
Range: D = 1 - 31, M = 1-12,
Y = 1970 - 2069
Increments of 1
ENTER TIME (hh:mm)
:##:##
MODEL #: ######
FIRMWARE REV. #: ######
PRESS ENTER TO ACCESS
FACTORY SETTINGS
Range: H = 00 - 23, M = 0 - 59
Increments of 1
SP.13 Calibration & Service (Setpoint Page 13)
Certain screens are displayed for user information only, such
as: Current date and time, Model number and Firmware
revision number. Setpoint changes in this page will only be
accessible to factory personnel.
SP13.1 Set Date and Time: Displays the date and time.
• Enter Date (DDMMYYYY): Allows the factory
personnel to program the date for the TX in the
format shown.
• Enter Time (hh:mm): Allows the factory personnel to
program the time for the TX.
SP13.2 Model & Firmware #: Displays the model number
and firmware revision in the TX.
SP13.3 Press Enter to Access Factory Settings: Available
to qualified personnel.
