Filter
Top Products
MANUAL
V1.0
TV+
MAIN SETTINGS > P. 49
“Cancel”
use this button to discard any changes you may have made since entering this screen.
7.4 “neTwOrK” seTTings“neTwOrK” seTTings
The rst time you turned on your ARCHOS, the installation wizard helped
you congure the WiFi and Ethernet connections.
Every time you restart your ARCHOS, it will automatically connect to the
last congured network.
This section explains how to change your Network conguration, for exam-
ple if you want to connect to a different network.
•
•
•
This screen displays your connection
status.
Select the “Network Details” button
to view the information concerning
the network the ARCHOS is currently
connected to: IP, security details, etc.
You have the possibility to connect
to the internet via the WiFi or via an
Ethernet cable.
•
•
•
ETHERNET CABLE CONNECTION
Select “Connect to an Ethernet Network...”
Use the same procedure as for a WiFi open network when using an Ethernet cable.
Jump ahead to the WiFi section
Open Networks
.
WIFI CONNECTION
When you select “Connect to a WiFi Network...”, The ARCHOS will scan for available
networks. The list of available networks will be displayed.
The List of Available Networks
The list of available networks shows
all the wireless networks in range of
your device.
In the list of available networks, you
will see the following information:
•
•
-
•
•
•