Archos TV+ DVR User Manual


 
MANUAL
V1.0
TV+
MAIN SETTINGS > P. 50
1.
Conguration status: congured network uncongured network
2.
The name of the network (SSID), if it is broadcasted
(if the SSID is not broad-
casted, you will be prompted to enter it in the next conguration screen if you
congure this network).
3.
The strength of the signal.
4.
The type of encryption key that is required:
Open network (no key)
WEP key
WPA key
WPA2 key
5.
The channel used by the network.
6.
The type of network (Infrastructure or Ad-Hoc).
Ad-Hoc networks are not sup-
ported at this time.
Use the navigation buttons to highlight a network and press OK.
You will be taken to the conguration screen for this network, where you will
have to enter some information to set up your access to this network.
WiFi Network Conguration
In order to connect to a wireless network, the ARCHOS will need some specic infor-
mation about the network. Your device will automatically pick up certain pieces of in-
formation that it needs from the WiFi router. You can enter the rest of the information
manually in the network’s conguration screen, as shown in the following sections.
Open Networks (also valid for Ethernet cable connection)
Open networks do not require an
authentication key.
If the network has automatic con-
guration turned on (DHCP)*, sim-
ply select the “Connect” button,
and your ARCHOS will connect to
this network, provided the signal is
strong enough.