Asus TS100-E4/PI2 Home Theater Server User Manual


  Open as PDF
of 158
 
ASUS TS100-E4/PI2 5-5
5.2.1 Creating a RAID 0 set (striped)
To create a RAID 0 set:
1. From the utility main menu, select
1. Create RAID Volume, then press
<Enter>. This screen appears.
2. Enter a name for the RAID 0 set, then press <Enter>.
3. When the
RAID Level item is highlighted, press the up/down arrow key
to select RAID 0(Stripe), then press <Enter>.
4. When the
Disks item is highlighted, press <Enter> to select the hard
disk drives to congure as RAID. This SELECT DISKS screen appears.
Intel(R)MatrixStorageManagerOptionROMv5.0.0.1032ICH7RwRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[ CREATE ARRAY MENU ]
[ DISK/VOLUMEINFORMATION]
Enterastringbetween1and16charactersinlengththatcanbeused
to uniquely identify the RAID volume. This name is case sensitive and
cannot contain special characters.
[↑↓]-Change[TAB]-Next[ESC]-PreviousMenu[Enter]-Select
Name:
RAID Level:
Disks:
StripSize:
Capacity:
Volume0
RAID0(Stripe)
SelectDisks
128KB
0.0 GB
Create Volume
[ SELECTDISKS]
[↑↓]-Previous/Next[SPACE]-Selects[ENTER]-SelectionComplete
PortDriveModelSerial#SizeStatus
0XXXXXXXXXXXXXXXXXXXXXX.XGBNon-RAIDDisk
1XXXXXXXXXXXXXXXXXXXXXX.XGBNon-RAIDDisk
2XXXXXXXXXXXXXXXXXXXXXX.XGBNon-RAIDDisk
3XXXXXXXXXXXXXXXXXXXXXX.XGBNon-RAIDDisk
Select2to4diskstouseincreatingthevolume.
5. Use the up/down arrow key to highlight a drive, then press <Space> to
select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
 previous next