Asus TS100-E4/PI2 Home Theater Server User Manual


  Open as PDF
of 158
 
4-24 Chapter 4: BIOS setup
DRAM Frequency [Auto]
Allows you to set the DDR operating frequency.
Conguration options: [Auto] [533 MHz] [667 MHz]
Congure DRAM Timing by SPD [Enabled]
When this item is enabled, the DRAM timing parameters are set according
to the DRAM SPD (Serial Presence Detect). When disabled, you can manu-
ally set the DRAM timing parameters through the DRAM sub-items. The fol-
lowing sub‑items appear when this item is disabled. Conguration options:
[Disabled] [Enabled]
DRAMCAS#Latency[5Clocks]
Controls the latency between the SDRAM read command and the time
the data actually becomes available. Conguration options: [5 Clocks]
[4 Clocks] [3 Clocks] [6 Clocks]
DRAMRAS#Precharge[4Clocks]
Controls idle clocks after issuing a precharge command to the DDR
SDRAM. Conguration options: [2 Clocks] [3 Clocks] [4 Clocks] [5
Clocks]
DRAMRAS#toCAS#Delay[4Clocks]
Controls the latency between the DDR SDRAM active command and
the read/write command. Conguration options: [2 Clocks]
[3 Clocks] [4 Clocks] [5 Clocks]
DRAMRAS#ActivatetoPrechargeDelay[15DRAMClocks]
Conguration options: [1 Clocks] [2 Clocks] ~ [15 Clocks]
4.4.6 Chipset
The Chipset Conguration menu allows you to change the advanced chipset
settings. Select an item then press <Enter> to display the sub-menu.
Select Screen
Select Item
+- Change Option
F1 General Help
F10SaveandExit
ESCExit
v02.58(C)Copyright1985-2004,AmericanMegatrends,Inc.
BIOS SETUP UTILITY
Advanced
Manual DRAM Frequency
SettingorAutobySPD
Advanced Chipset Settings
DRAMFrequency [Auto]
CongureDRAMTimingbySPD [Enabled]
OnboardLANBootROM [Enabled]
PEGPortConguration
PEGPort [Enabled]
PEGPortVC1Map [TC7]
PEGForcex1 [Disabled]
MemoryRemapFeature [Enabled]
 previous next