Filter
Top Products
2-23ASUS TS100-E4/PI2
2.9 Connecting cables
The TS100-E4/PI2 chassis includes the power and signal cables that you
need to connect to the motherboard, storage drives, and other devices
that you intend to install.
Most of the cables for the chassis kit are already connected upon
shipment. When installing system devices and connecting cables, make
sure that all cables are routed properly for better system stability and
performance. Refer to the picture below when arranging cables.
See “Chapter 3: Motherboard information” for detailed information on
motherboard connectors.
1. 4-pin ATX 12V power plug
2. 24-pin ATX power plug
3. Floppy disk drive ribbon cable
4. Front panel USB 2.0 cable
Standard cables connected to the motherboard
5. IDE signal cable
6. Serial ATA signal cables
7. System panel cable
8. System fan cables
1
2
3
4
6
5
7
8