Filter
Top Products
2-19ASUS TS100-E4/PI2
2.7 Installing expansion cards
The system comes with two PCI slots, one PCI Express x8 (x8 link) slot, and
one PCI Express x1 (x4 link) slot.
Make sure to unplug the power supply before installing or removing an
expansion card(s). Failure to do so may cause severe damage to both
the motherboard and the components.
To install an expansion card:
1. Before installing the expansion card, read the documentation that came
with it and make the necessary hardware settings for the card.
2. Lay the system on its side on a at, stable surface.
3. Release the screw as show.
4. Then remove the hook metal
bracket under all slots of metal
bracket.
5. Then remove the metal bracket
opposite the slot that you intend
to use. Keep the metal bracket
screw for later use.
6. Align the card connector with the
slot, then press firmly until the
card is completely seated on the
slot.