Filter
Top Products
3-8 Chapter 3: Motherboard Information
6. Gigabit LAN controller setting [3-pin LAN_EN1)
These jumpers allow you to enable or disable the onboard Broadcom
®
BCM5721 Gigabit LAN1 controller. Set to pins 1-2 to activate the
Gigabit LAN controller.
7. RAID controller selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID conguration utility to use when
you create disk arrays. Place the jumper caps over pins 1-2 if you want to
use the LSI Logic Embedded SATA RAID Setup Utility (default); other-
wise, place the jumper caps to pins 2-3 to use the Intel
®
Matrix Storage
Manager.
P5M2-M/C_TS100-E4
®
P5M2-M/C_TS100-E4 LAN_EN1 Setting
Enable
(Default)
Disable
LAN_EN1
2
1
2
3
P5M2-M/C_TS100-E4
®
P5M2-M/C_TS100-E4 RAID_SEL1 Setting
RAID_SEL1
LSI RAID ROM
(Default)
INTEL RAID ROM
2
1
2
3