Filter
Top Products
5-12 Chapter 5: RAID Conguration
5.3 LSI Logic Embedded SATA RAID Set-
up Utility
The LSI Logic Embedded SATA RAID Setup Utility allows you to create RAID 0
or RAID 1 set(s) from SATA hard disk drives connected to the SATA connec-
tors supported by the motherboard Southbridge chip.
You may also create a RAID set(s) in a Windows
®
operating environment
using the Global Array Manager (GAM) application. Refer to the GAM user
guide in the motherboard support CD for details.
To enter the LSI Logic Embedded SATA RAID Setup Utility:
1. Turn on the system after installing all the SATA hard disk drives.
2. During POST, the LSI Logic Embedded SATA RAID Setup Utility auto
-
matically detects the installed SATA hard disk drives and displays any
existing RAID set(s). Press <Ctrl> + <M> to enter the utility.
The LSI Logic Embedded SATA RAID automatically congures a RAID 1
(Mirrored) set when the SATA is congured as RAID in the BIOS and you
installed two hard disk drives without a RAID conguration.