Asus TS100-E4/PI2 Home Theater Server User Manual


  Open as PDF
of 158
 
ASUS TS100-E4/PI2 5-7
5.2.2 Creating a RAID 1 set (mirrored)
To create a RAID 1 set:
1. From the utility main menu, select
1. Create RAID Volume, then press
<Enter>. This screen appears.
2. Enter a name for the RAID 1 set, then press <Enter>.
3. When the
RAID Level item is highlighted, press the up/down arrow key
to select RAID 1(Mirror), then press <Enter>.
4 When the
Disks item is highlighted, press <Enter> to select the hard
disk drives to congure as RAID. The SELECT DISKS screen appears.
5 Use the up/down arrow key to highlight a drive, then press <Space> to
select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
6. When the
Capacity item is highlighted, key in the RAID volume capac-
ity that you want, then press <Enter>. The default value indicates the
maximum allowed capacity.
7. Press <Enter> when the
Create Volume item is highlighted. This warning
message appears.
Intel(R)MatrixStorageManagerOptionROMv5.0.0.1032ICH7RwRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[ CREATE ARRAY MENU ]
[ DISK/VOLUMEINFORMATION]
Enterastringbetween1and16charactersinlengththatcanbeused
to uniquely identify the RAID volume. This name is case sensitive and
cannot contain special characters.
[↑↓]-Change[TAB]-Next[ESC]-PreviousMenu[Enter]-Select
Name:
RAID Level:
Disks:
StripSize:
Capacity:
Volume1
RAID1(Mirror)
SelectDisks
N/A
XX.X GB
Create Volume
WARNING:ALLDATAONSELECTEDDISKSWILLBELOST.
Are you sure you want to create this volume? (Y/N):
8. Press <Y> to create the RAID volume and return to main menu or <N>
to go back to Create Volume menu.
 previous next