Filter
Top Products
Chapter 3 - Using CyROS Menus 21
Cyclades-PR4000
menu interface is the same as that described earlier in this section. Using Telnet instead of a console for the initial
Ethernet configuration is discussed in Appendix C of the Installation Manual.
The CyROS Management Utility
After one of the interfaces has been connected and configured, there is another way to interact with CyROS. Type
the IP address in the location field in an HTML browser of a PC connected locally or remotely through the configured
interface. A super-user ID and password will be requested (these are the same ID and password used with the
line-terminal interface). A clickable image of the router back panel will apear, as shown in Figure 3.2.
Configuration Menu Interface (Text Mode)
Global Ras Table
End HTTP session
Firmware version: Cyclades-PR4000: Cyros V_1.9.0i (Mar/28/00) #2
Cyros Management Utility
FIGURE 3.2 CYROS MANAGEMENT UTILITY HOME PAGE
The link
Configuration Menu Interface
will present an HTML version of the CyROS Main Menu, described previously.
Clicking on an interface will show its current status and some additional information. The link
Global RAS Table
will show a table similar to that shown in Figure 3.3. Clicking on
End HTTP Session
will terminate the connection.