Filter
Top Products
Cyclades-PR4000
40Chapter 4 - Step-by-Step Instructions
Parameter Example Your Application
Secondary IP
Address
0.0.0.0 for none
Enable Dynamic
Local IP Address
Yes, because the IP address of the
SWAN interface will be assigned
dynamically.
Remote IP Address
Type
Any
Remote IP Address 0.0.0.0
IP MTU Use the preset value, 1500. This
determines whether or not a given IP
datagram is fragmented.
NAT
Global Assigned
because the IP
address of the SWAN interface will be
assigned dynamically.
ICMP Port Inactive
Incoming Rule List None, filters and traffic control are not
included in this example.
Outgoing Rule List
Name
None, filters and traffic control are not
included in this example.
Routing of Broadcast
Messages
Inactive
FIGURE 4.9 CONTINUED -- SWAN NETWORK PROTOCOL (IP) MENU PARAMETERS