Barco 70 Projection Television User Manual


 
2. Installation Guidelines
For CineVERSUM 60:
Lens
PD
CD
1.7 - 2.25
Wide : PD = 1.7 x SW
Tele : PD = 2.25 x SW
CD=B+C-5.9cm
2.25 - 3
Wide : PD = 2.25 x SW
Tele : PD = 3 x SW
CD=B+C-5.9cm
With C = 0.23 x SH
2.4 Safety Area around projector
Safety area
Make sure the projector is located so that the air inlets and outlets for the cooling system are not obstructed. Leave at least 50 cm
between the projector and an object next t
o the projector.
A
B
Image 2-2
Do not place inflammable materials within the safety area.
2.5 Cleaning the lens
To minimize the possibility of damaging the optical coating or scratching exposed lens surface, we have de-
veloped recommendations for cleaning the lens. FIRST, we recommend you try to remove any material from
thelensbyblo
wing it off with clean, dry deionized air. DO NOT use any liquid to clean the lenses.
Necessary tools
Toraysee
TM
cloth, order number : R379058.
Howtocleanthelens?
Proceed as follow :
1. Always wipe lenses with a CLEAN Toraysee
TM
cloth.
2. Always wipe lenses in a single direction.
Warning: Do not wipe back and forwards across the lens surface as this tends to grind dirt into the coating.
3. Do not leave cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.
4. If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty cloth.
Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the cloth.
Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.
10 R5976763 CINEVERSUM 60/70 22042004