Filter
Top Products
9. Installation menu
5. Push the cursor key ↑ or ↓ to highlight H below Barscale position.
6. Press ENTER to toggle between Left, Center and Right.
Toggle until the desired horizontal position is obtained.
Installation
Input slots
File service
Internal pattern
When no signal
Source transition
OSD configuration
Language
V-Keystone
H-Keystone
Global keystone
Orientations
Back
Menu 9-27
OSD configuration
Menu position
V Top
H Left
Barscale status Yes
Barscale position
V Top
H Right
Message status Yes
Back
Menu 9-28
9.8.4 Message status
What can be done ?
Messages generated by the projector to inform the user about e.g. shutdown, etc. can be disabled.
Enabling/disabling messages
1. Push the cursor key ↑ or ↓ to highlight OSD configuration. (menu 9-29)
2. Press ENTER to select.
The OSD configuration menu will be displayed. (menu 9-30)
3. Press ENTER to toggle between Yes and No.
Yes The messages, when generate by the projector will be displayed.
No No messages will be displayed.
Installation
Input slots
File service
Internal pattern
When no signal
Source transition
OSD configuration
Language
V-Keystone
H-Keystone
Global keystone
Orientations
Back
Menu 9-29
OSD configuration
Menu position
V Top
H Left
Barscale status Yes
Barscale position
V Top
H Right
Message status Yes
Back
Menu 9-30
9.9 Language support
What is possible ?
The language of the OSD can be changed to some predefined languages.
The following languages are available:
• English
•German
• French
• Chinese
66
R5976763 CINEVERSUM 60/70 22042004