Barco 70 Projection Television User Manual


 
8. Advanced Settings
Howtosizetheimage?
1. Push the cursor key or to highlight Position.(menu8-11)
2. Press ENTER to select.
The Position menu will be displayed. (menu 8-12)
3. Push the cursor key or to highlight Vertical size.
A slide bar will be displayed.
4. Use the cursor keys to resize the image vertically.
When the value is negative the image becomes less high.
When the value is positive the image becomes higher.
The adjustment range can vary from - 255 to + 255. 0 is the nominal position.
Advanced settings
Aspect Ratio
Position
PiP Configuration
Blanking
Input Balance
Back
Menu 8-11
Position
Horizontal shift
Horizontal size
Vertical shift
Vertical size
Back
Menu 8-12
8.5 Blanking
What can be done ?
Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the scree
nand
to hide or black out unwanted information (or noise). A ’0’ on the bar scale indicates no blanking.
Which blanking adjustments are available ?
top blanking
bottom blanking
left blanking
right blanking
50
R5976763 CINEVERSUM 60/70 22042004