Filter
Top Products
9. Installation menu
Start up
1. Press ADJ or ENTER to start up the Main menu. (menu 9-1)
2. Push the cursor key ↑ or ↓ to select Installation.
3. Press ENTER to select.
The Installation menu will be displayed. (menu 9-2)
Main Menu
Image settings
Advanced settings
Installation
Service
1. PC
2. RGB/Component
3. DVI
4. SVideo
* 5. Video
6. Component
Shutdown
Back
Menu 9-1
Installation
Input slots
File service
Internal pattern
When no signal
Source transition
OSD configuration
Language
V-Keystone
H-Keystone
Global keystone
Orientations
Back
Menu 9-2
9.3 Input Slots
Overview
• 5 RCA input selection (RGB/component input)
• Reset a single input
• Reset all inputs
9.3.1 5 RCA input selection (RGB/component input)
What can be done ?
The 5 RCA input can accept RGB signals as well as Component signals. Therefor, this input must be configured for the correct
signal input.
How to configure ?
1. Push the cursor key ↑ or ↓ to highlight Input slots. (menu 9-3)
2. Press ENTER to select.
The input slots menu will be displayed. (menu 9-4)
3. Push the cursor key ↑ or ↓ to highlight the 5 RCA selection.
4. Press ENTER to toggle between RGB, YUV or SCART.
RGB Input is configured to accept RGB signals.
YUV
Input is configured to accept component signals
SCART Input is configured to accept RGB signals with Video as sync on the Hs input.
Installation
Input slots
File service
Internal pattern
When no signal
Source transition
OSD configuration
Language
V-Keystone
H-Keystone
Global keystone
Orientations
Back
Menu 9-3
Input slots
5 RCA
YUV
Reset single slot
PC
RGB/Component
DVI
SVideo
Video
Component
Reset all slots
All input slots
Back
Menu 9-4
58 R5976763 CINEVERSUM 60/70 22042004