Filter
Top Products
5. Getting used to the menu structure
When no action is taken within a few seconds while a menu box or slide bar is displayed, the projector quits
the menu structure or slide bar (adjustment).
The menus inserted in this manual are always full menus: all the items are visible.
Greyed out menu items are not available for the current selected source or current software version.
5.3 How to make an adjustment
How to perform ?
1. Use the arrow keys to adjust the selected control.
The following keys are mostly combined:
-The↑ and → key perform an adjustment in the positive direction (or to the right, or upwards).
-The↓ and ← key perform an adjustment in the negative direction (or to the left, or downwards).
5.4 Access Control via a password
Password protection
Some items (Advanced settings, installation and service) in the Main menu
can be password protected. This password protects the
user against misalignment of the projector. Only the daily necessary items are available for non experienced users.
This password protection can be enabled or disabled in the service menu. Once the password protection is set, this password will
be necessary to disable it again.
The customer is allowed to create his own password.
How to get access ?
1. Select a item which is password protected.
The Enter password box appears with the first position highlighted.
2. Use the ↑ or ↓ keys to select first character.
The characters can be alphanumeric (from 0 to 9 and from a to z).
3. Press ENTER to accept.
The second character will be highlighted.
4. Select the second character and press ENTER to accept.
5. Select the third character and press ENTER to continue in the adjustment mode.
32
R5976763 CINEVERSUM 60/70 22042004