Filter
Top Products
Configuring your machine for a wireless network
24
3
h The machine will search for your network and display a list of available SSIDs.
Swipe up or down to display <New SSID>. Press <New SSID>, and then press OK.
i Enter the SSID name. (For information on how to enter text, see the Quick Setup Guide.)
Press OK.
j Press Infrastructure when instructed.
k Choose the Authentication method.
Do one of the following:
If you choose Open System, go to step l.
If you choose Shared Key, go to step m.
If you choose WPA/WPA2-PSK, go to step n.
l Choose the Encryption type None or WEP.
Do one of the following:
If you choose None, go to step p.
If you choose WEP, go to step m.
m Enter the WEP key you wrote down in step a on page 23. Press OK. Go to step p. (For information on
how to enter text, see the Quick Setup Guide.)
n Choose the Encryption type, TKIP or AES. Go to step o.
o Enter the WPA key you wrote down in step a on page 23 and press OK. Go to step p. (For information
on how to enter text, see the Quick Setup Guide.)
p To apply the settings, press Yes. To cancel, press No.
Do one of the following:
If you choose Yes, go to step q.
If you choose No, go back to step h.
q The machine starts to connect to the wireless device you have chosen.
r A connection result message appears for 60 seconds on the LCD and a wireless LAN report will
automatically be printed. If the connection failed, check the error code on the printed report.
See Quick Setup Guide: Troubleshooting
(Windows
®
)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please double-click Start Here OSX in the
CD-ROM.