CHAPTER
15-1
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-29225-01
15
Configuring QoS
This chapter describes how to configure quality of service (QoS) on your access point. With this feature,
you can provide preferential treatment to certain traffic at the expense of others. Without QoS, the access
point offers best-effort service to each packet, regardless of the packet contents or size. It sends the
packets without any assurance of reliability, delay bounds, or throughput.
Note For complete syntax and usage information for the commands used in this chapter, refer to the Cisco IOS
Command Reference for Cisco Aironet Access Points and Bridges for this release.
This chapter consists of the following sections:
• Understanding QoS for Wireless LANs, page 15-2
• Configuring QoS, page 15-6
• QoS Configuration Examples, page 15-15