Cisco Systems 15.2(2)JA Universal Remote User Manual


 
22-14
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-29225-01
Chapter 22 Troubleshooting
Checking the Top Panel Indicators
Table 22-5 1250 Series Access Point LED Signals
Message type Ethernet LED Status LED Radio LED Meaning
Boot loader status Green Off Amber DRAM test in progress.
Green Green Green DRAM memory test ok.
Off Off Red Board initialization in progress.
Off Blinking green Blinking green Initialize Flash file system.
Off Green Green Flash memory test ok.
Amber White Off Initialize Ethernet.
Green Blinking blue Off Ethernet test ok.
Green Blinking green Green Starting Cisco IOS.
Off Off Off Initialization ok.
Association status Green Normal operating condition, but no wireless
client devices are associated with the unit.
Blue Normal operating condition, at least one wireless
client device is associated with the unit.
Operating status Green Ethernet link is operational.
Blinking green Transmitting or receiving Ethernet packets.
Blinking green Transmitting or receiving radio packets.
Blinking blue Software upgrade in progress.
Blinking green Blinking green Blinking green Access point location command.
Boot loader warnings Off Blinking red Off Ethernet link not operational.
Red Red Off Ethernet failure.
Amber Blinking blue Off Configuration recovery in progress
(Mode button pressed for 2 to 3 seconds).
Off Red Red Image recovery
(Mode button pressed for 20 to 30 seconds).
Blinking green Blinking green Red Image recovery in progress and Mode button is
released.