Filter
Top Products
Contents
6
Cisco IOS Software Configuration Guide for Cisco Aironet Access Points
OL-29225-01
Confirming that DFS is Enabled 6-20
Configuring a Channel 6-20
Blocking Channels from DFS Selection 6-21
Setting the 802.11n Guard Interval 6-22
Configuring Location-Based Services 6-22
Understanding Location-Based Services 6-22
Configuring LBS on Access Points 6-23
Enabling and Disabling World Mode 6-24
Disabling and Enabling Short Radio Preambles 6-25
Configuring Transmit and Receive Antennas 6-26
Enabling and Disabling Gratuitous Probe Response 6-27
Disabling and Enabling Aironet Extensions 6-28
Configuring the Ethernet Encapsulation Transformation Method 6-29
Enabling and Disabling Reliable Multicast to Workgroup Bridges 6-29
Enabling and Disabling Public Secure Packet Forwarding 6-30
Configuring Protected Ports 6-31
Configuring the Beacon Period and the DTIM 6-32
Configure RTS Threshold and Retries 6-32
Configuring the Maximum Data Retries 6-33
Configuring the Fragmentation Threshold 6-33
Enabling Short Slot Time for 802.11g Radios 6-34
Performing a Carrier Busy Test 6-34
Configuring VoIP Packet Handling 6-34
Viewing VoWLAN Metrics 6-35
Viewing Voice Reports 6-36
Viewing Wireless Client Reports 6-38
Viewing Voice Fault Summary 6-39
Configuring Voice QoS Settings 6-40
Configuring Voice Fault Settings 6-41
Configuring ClientLink 6-42
Using the CLI to Configure ClientLink 6-42
Debugging Radio Functions 6-42
CHAPTER
7 Configuring Multiple SSIDs 7-1
Understanding Multiple SSIDs 7-2
Effect of Software Versions on SSIDs 7-2
Configuring Multiple SSIDs 7-4