Filter
Top Products
4.6 LIVE
Live means viewing the present video images from the cameras on the monitor.
4.6.1 Full Screen display
Full screen display is possible in the Live mode or Record mode.
Use channel selection button to choose a corresponding video input.
Refer to 4.2 “Full Screen in LIVE Mode”
4.6.2 Quad Screen
All 4 cameras are viewed on the monitor at the same time in reduced size.
Quad screen is available in the Live mode or Record mode.
Refer to 4.2 “Quad Screen in LIVE Mode”
4.6.3 Sequential Mode Operation
The system will be viewed a full screen at a time in a continuous sequence (one camera after
another) by pressing the AUTO button. It will available in the LIVE and RECORD mode.
The dwell time can be adjusted from 0 to 10 seconds (See section 5.6.2 for more details).
Press the QUAD button to return to the QUAD mode.
4.6.4 PIP screen
The PIP (Picture In Picture) allows you to view two viewing areas simultaneously, one being
the main channel, the other being viewed as a sub-picture in the main screen. To change
between Single PIP and Dual PIP, repeatedly press the PIP button.
PIP screen is available in the LIVE mode and RECORD mode.
Refer to 4.2 “PIP Screen in the LIVE Mode”
4.6.5 POP screen
The POP divides the screen into 4 screens, with the main channel occupying two-thirds of the
screen. Press the POP button to swap the positions of cameras appearing in the POP
(Between the Main and Sub screen). To exit the POP mode, press another button.
POP screen is available in the LIVE mode and RECORD mode.
Refer to 4.2 “POP Screen in LIVE Mode”
4.6.6 Freeze screen
Freeze is available in the Live or Quad mode.
In the Full screen mode
- Press the channel button to freeze the current display.
- Press the channel button again or press another channel selection button to release the
Freeze function.
- When the FREEZE button is pressed, the FRZ symbol will be shown on the screen.
In the Quad mode
- Press any channel selection button to get a frozen display of corresponding part on the
screen.
- 15 -