Clover Electronics CDR 4170 DVR User Manual


 
- Press the same channel selection button to release the freeze function.
Freeze symbol
4.6.7 OSD On / Off
Available in the LIVE, RECORD or PLAYBACK mode.
When the OSD button is pressed, all the texts except the REC and PB (PLAYBACK) OSD are
cleared temporarily.
When the button is pressed again while OSD is in OFF position, the system status will be
displayed.
Pressing the OSD button again will bring the system to normal condition.
4.7 RECORDING
4.7.1 Recording Option
- Continuous recording
- Timer recording
- Alarm recording
- Motion recording
NOTE
This system provides Watchdog function.
When power goes off during recording and power comes up, it automatically
starts to record.
4.7.2 Continuous recording
Recording will start when the REC button is pressed. The REC indicator will be lit and ‘REC
will blink on the screen while the unit is recording.
Press and hold the REC button for 3 seconds to stop recording, and it returns to the LIVE
mode.
When the system is in the continuous recording mode, the recording will continue until stop
recording.
- 16 -