Filter
Top Products
43
In the Search & Scan banner you will see a ‘low battery’ icon, which will
disappear only when the batteries are replaced.
When the batteries in your Sky remote control need replacing, insert
two AA (MN1500, LR6 or UM-3) batteries. To replace the batteries:
1. Push the catch on the bottom of the remote control battery
cover forward, remove the cover.
2. Remove the old batteries.
3. Be sure to match the + and – marks on the batteries to their
respective marks inside the battery compartment.
4. Replace the battery cover, ensuring the bottom catch clicks into
place.
Don’t leave flat batteries in your remote control.
Replace both batteries at the same time.
If you leave your Sky remote control without batteries for more than
10 minutes your remote control settings for operating your TV will be
lost. After replacing the batteries, you will be able to control your Sky
digibox as normal, but you will have to reset your remote control to
operate your TV. Refer to the Setting your remote control to operate
your TV section on page 40 for further information.
EXTRA INFORMATION