Filter
Top Products
dCS 954 User Manual Manual for Standard Software Version 1.5x
dCS Ltd June 2000
Manual part no: DOC136954 iss 2B1
Page 28
file 135954ma2b1.pdf available from website
Contact
dCS
on + 44 1799 531 999 email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0) web site: www.dcsltd.co.uk
S-No -
The control board serial number scrolls along the display. You will need
something to write this on, if you call us for help.
Flip -
(Flip channels). Normally set to Off. If you find the Left and Right outputs from
your system are reversed due to a connection error, set Flip to On to digitally
swap them back. The main display shows Flip.d while this feature is turned on.
Flip is not stored at power down so you should correct the error and turn Flip
Off.
Loc -
(Lock/Unlock front panel). Front panel Lock, normally Off. Set to On to prevent
unauthorised changes using the front panel buttons. The menu has to be
accessed to turn the lock off again.
End -
Exits the menu.