dCS 954 User Manual Manual for Standard Software Version 1.5x
dCS Ltd June 2000
Manual part no: DOC136954 iss 2B1
Page 43
file 135954ma2b1.pdf available from website
Contact
dCS
on + 44 1799 531 999 email to: more@dcsltd.co.uk
(inside the UK replace + 44 with 0) web site: www.dcsltd.co.uk
AES3 in and out (Reference Out) are related as below, where they are at the
same sample rate, and the AES3 input is used as a sync source. The alignment
is better than 40ns. Input is at the top of the displays, output is at the bottom.
Signals are at the sockets on the dCS 954, the unit was slaved to AES1 and the
Ref In menu item was set to Route.
Figure 23 – AES3 in to AES3 out, 96 kS/s