Filter
Top Products
8
Making connectionsDX-19LD150A11
Connecting power
To connect the power:
• Connect the AC power cord to the AC connector on
the back of your TV/DVD combo, then plug the other
end into a power outlet.
Connecting a cable or satellite box
Many cable or satellite TV boxes have more than one
connection type. To get the best video, you should use
the best connection type available. For more information,
see “What connection should I use?” on page 7.
Using an HDMI cable (best)
To connect a cable or satellite box using HDMI:
1 Turn off your TV/DVD combo and all connected
equipment.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect an HDMI cable (not provided) to one of the
HDMI jacks on the back of your TV/DVD combo and
to the HDMI OUT jack on the cable or satellite box.
4 Turn on your TV/DVD combo, then turn on the cable
or satellite box.
5 Go through the setup wizard described on page 16.
6 To watch TV, press INPUT to open the INPUT SOURCE
list, then press INPUT repeatedly, or press
or to
select HDMI 1 or HDMI 2, then press ENTER/.
Using DVI (same as HDMI but requires an audio
connection)
To connect a cable or satellite box using DVI:
1 Turn off your TV/DVD combo and all connected
equipment.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect an HDMI-DVI adapter (not provided) to one
end of an HDMI cable (not provided), then connect it
to the DVI OUT jack on the cable or satellite box.
4 Connect the other end of the HDMI cable to the
HDMI1 jack on the back of your TV/DVD combo.
5 Connect a 3.5 mm audio cable (not provided) to the
PC/DVI AUDIO IN jack on the back of your TV/DVD
combo and to the AUDIO OUT jacks on the cable or
satellite box.
6 Turn on your TV/DVD combo, then turn on the cable
or satellite box.
7 Go through the setup wizard described on page 16.
8 To watch TV, press INPUT to open the INPUT SOURCE
list, then press INPUT repeatedly, or press
or to
select HDMI 1, then press ENTER/.
Notes
• Your TV/DVD combo should only be operated
from the power source indicated on the label.
• Always unplug the AC power cord from the
power outlet when you will not be using your
TV/DVD combo for an extended period of time.
Notes
An HDMI cable carries both audio and video. You do
not need to use any audio cables.
P
B
P
R
Back of TV/DVD combo
HDMI cable
Cable or satellite box
Cable TV wall
jack (75 ohm)
To Cable-in jack on the
cable TV or satellite box
Note
A DVI device can only be connected to the HDMI1
jack on the back of your TV/DVD combo. If you
connect a DVI device to the HDMI2 jack, you will not
hear sound.
P
B
P
R
HDMI cable with
HDMI-DVI adapter
3.5 mm audio cable
Cable or satellite box
Back of TV/DVD combo
Cable TV wall
jack (75 ohm)
To Cable-in jack on the
cable TV or satellite box
DX-19LD150A11_11-0915_MAN_ENG_V4.book Page 8 Monday, August 29, 2011 8:29 AM