Filter
Top Products
Making connections
9
DX-19LD150A11
Using component video cable (better)
To connect a cable or satellite box using component
video:
1 Turn off your TV/DVD combo and all connected
equipment.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (provided) to the
COMPONENT IN/Y, P
B, PR jacks on the back of your
TV/DVD combo and to the component video out
jacks on the cable or satellite box.
4 Connect an audio cable (provided) to the L, R audio
jacks on the back of your TV/DVD combo and to the
audio out jacks on the cable or satellite TV box.
5 Turn on your TV/DVD combo, then turn on the cable
or satellite box.
6 Go through the setup wizard described on page 16.
7 To watch T V, press INPUT to open the INPUT SOURCE
list, then press INPUT repeatedly, or press or to
select Component, then press ENTER/.
Using composite video cable (good)
To connect a cable or satellite box using composite
video:
1 Turn off your TV/DVD combo and all connected
equipment.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect an A/V cable (not provided) to the VIDEO
IN/VIDEO 1, and L, R jacks on the back of your
TV/DVD combo and to the composite video and
audio out jacks on the cable or satellite box.
4 Turn on your TV/DVD combo, then turn on the cable
or satellite box.
5 Go through the setup wizard described on page 16.
6 To watch TV, press INPUT to open the INPUT SOURCE
list, then press INPUT repeatedly, or press or to
select A/V, then press ENTER/.
P
B
P
R
Back of TV/DVD combo
Component video cable
Audio cable
Cable or satellite box
From cable TV
wall jack (75 ohm)
To Cable-in jack on the
cable TV or satellite box
P
B
P
R
Back of TV/DVD combo
Cable or satellite box
A/V cable
Cables are often
color-coded to match
color-coded jacks.
From cable TV
wall jack (75 ohm
)
To Cable-in jack on the
cable TV or satellite box
DX-19LD150A11_11-0915_MAN_ENG_V4.book Page 9 Monday, August 29, 2011 8:29 AM