Dynex DX-19LD150A11 Flat Panel Television User Manual


 
TV/DVD combo components
5
DX-19LD150A11
Back Side
# Item Description
AC IN Connect the supplied power cord here.
ANT/CABLE IN
Connect an antenna or cable TV to this jack. For
more information, see “Connecting an antenna
or cable TV (no box)” on page 10.
COMPONENT IN
Video - Y, P
B, PR
Audio - L and R
Connect the video and audio cables for a
component video device to these jacks. For
more information, see “Connecting a VCR or
DVD player” on page 11.
VIDEO IN
S-VIDEO and
VIDEO
Audio - L and R
Connect the video cable for an AV device to
one of these jacks. Connect the audio cables to
the COMPONENT IN L and R jacks. For more
information, see “Connecting a VCR” on
page 12, or see "Connecting a VCR or DVD
player" on page 11.
VGA
Connect the video cable for a computer to this
jack. For more information, see “Connecting a
computer” on page 13.
PC/DVI AUDIO
IN
Connect the audio cable for a computer or a
DVI device to this jack. For more information,
see “Connecting a computer” on page 13 or
“Connecting a DVD or Blu-ray player” on
page 11.
HDMI1/HDMI2
Connect HDMI devices to these jacks. An HDMI
cable carries both video and sound. You do not
need to make an audio connection for an HDMI
device. For more information, see “Connecting
a DVD or Blu-ray player” on page 11.
OUT L, R
(analog audio
out)
Connect an analog sound system to these
jacks. For more information, see “Using analog
audio” on page 15.
SPDIF OUT
Connect a digital audio amplifier cable to this
jack. For more information, see “Using digital
audio” on page 15.
PHONE OUT
Connect headphones to this jack. For more
information, see “Connecting headphones” on
page 14.
USB IN
Plug a USB device, such as a flash drive, into
this jack. For more information, see
“Connecting a USB flash drive” on page 14.
P
B
P
R
1
2
3
4
5
6
7
8
9
10
11
# Item Description
Disc slot
Insert a disc (DVD or CD) into this slot
to change mode and begin playback.
MENU
Press to open the on-screen menu.
For more information, see
“Navigating the menus” on page 20.
EJECT
Press to eject the disc from the disc
slot.
STOP / CHANNEL
In DVD mode, press to stop playback.
In TV mode, press to go to the
previous channel in the channel list.
PLAY / CHANNEL
In DVD mode, press to begin or
resume playback.
In TV mode, press to go to the next
channel in the channel list.
VOLUME –/+
Press to decrease or increase the
volume.
INPUT
Press to open the INPUT SOURCE list
and select a video input source. For
more information, see “Selecting the
video input source” on page 17.
(Power)
Press to turn your TV/DVD combo on
or off (standby mode). When your
TV/DVD combo is in standby mode,
power still flows through it. To
completely disconnect power,
unplug the power cord.
1
2
3
4
5
6
7
8
DX-19LD150A11_11-0915_MAN_ENG_V4.book Page 5 Monday, August 29, 2011 8:29 AM