Adjusting the sound
23
DX-19LD150A11
Adjusting the sound
Selecting the sound mode or audio
language
To select an audio language in digital TV mode:
• Press SAP repeatedly to select an audio language (if
available).
To select the sound mode in analog TV mode:
• Press SAP repeatedly to cycle through the audio
sound mode. The options available depend on your
TV provider. You can select:
• Mono—Select this option if there is noise or
static from a weak broadcast signal.
• Stereo—Select this option for programs
broadcast in stereo sound.
• SAP—Select this option to enable audio in an
alternative language.
Adjusting the sound settings
To adjust the sound settings:
1 Press MENU. The on-screen menu opens with the
Picture menu displayed.
2 Press or to highlight Audio. The Audio menu
opens. Press or ENTER/ to access the menu.
3 Press or to highlight an option, then press or
to adjust the setting. You can select:
• Mode—Selects the EQ sound mode. You can
select Standard, Theater, Music, News, or
Custom.
• Treble—Adjusts the high sounds.
• Bass—Adjusts the low sounds.
• Balance—Adjusts the balance between the left
and right audio channels.
• Auto Volume—Adjusts the volume to keep the
volume level consistent when switching
channels or when switching from a TV show to a
commercial. You can select On or Off.
• Advanced Audio—Opens the Advanced Audio
sub-menu.
You can select:
• Digital Audio/SPDIF—Selects the preferred
audio format for digital audio signals.
Options include PCM and RAW.
• Audio Language—Selects the default
language track when watching digital TV
programs. Options include English, Français
(French), and Español (Spanish).
• MTS/SAP—Selects the default language
stream when watching analog or digital TV
channels. See "Selecting the sound mode or
audio language" on page 23.
• Speakers—Selects the TV audio output
source. If an external audio amplifier is
connected to your TV/DVD combo, select
External to output the TV sound from the
amplifier.
• Reset Audio Settings— Resets all audio settings
to factory defaults.
4 Press EXIT to close the menu.
Playing TV audio only
You can turn off the picture on your TV/DVD combo and
listen to the program audio only.
To play TV audio only:
1 Press MENU. The on-screen menu opens with the
Picture menu displayed.
2 Press or to highlight Channel. The Channel
menu opens. Press or ENTER/ to access the
menu.
Note
You can also press AUDIO to select the audio mode.
MTS Audio: Stereo
DX-19LD150A11_11-0915_MAN_ENG_V4.book Page 23 Monday, August 29, 2011 8:29 AM
