Filter
Top Products
12
Making connectionsDX-32E250A12
Using component video (better)
To connect a DVD or Blu-ray player using component video:
1 Make sure that your TV’s power cord is unplugged and the DVD or
Blu-ray player is turned off.
2 Connect a component video cable (not included) to the Y/P
B/PR
(component video) jacks on the side of your TV and to the
COMPONENT OUT jacks on the component video device.
3 Connect an audio cable (not included) to the L/R (audio in) jacks
on the side of your TV and to the L/R AUDIO OUT jacks on the
component video device.
4 Turn on your TV, then turn on the DVD or Blu-ray player.
5 Press INPUT to open the Input Source list.
6 Press
or to select Component/AV, then press ENTER.
Using composite video (good)
To connect a DVD or Blu-ray player using composite video:
1 Make sure that your TV’s power cord is unplugged and the DVD or
Blu-ray player is turned off.
2 Connect a composite cable (included) to the Y/VIDEO and L/R
(audio in) jacks on the side of your TV and to the AV OUT jacks on
the DVD or Blu-ray player.
3 Turn on your TV, then turn on the DVD or Blu-ray player.
4 Press INPUT to open the Input Source list.
5 Press
or to select Component/AV, then press ENTER.
Notes
The Y/Pb/Pr (component video) jacks shares the
audio jacks with the CVBS jacks.
When you connect the audio using the L and R audio
jacks, the audio output is analog.
If your TV has a digital audio jack (optical or coaxial),
you can connect the video to the component video
jacks and connect the audio to the digital audio jack
to get digital audio output.
Note
You can also press COMP to select the component
DVD or Blu-ray player.
Side of TV
DVD or Blu-ray player
Component video
cable
Audio cable
Note
When you connect the audio using the L and R audio
jacks, the audio output is analog.
Notes
• You can also press VIDEO to select the DVD or
Blu-ray player.
• If you are not using the included audio cable for
another device, you can use it and a standard
one-plug video cable instead of the three-plug
cable shown in this task.
•The Y/VIDEO jack shares the audio jacks with
the Y/Pb/Pr (component video) jacks.
DVD or Blu-ray player
The audio cables are color coded (white
and red) to the L and R audio jacks.
The video cable (yellow) shares a jack with
the component Y cable and goes to the
green jack.
Side of TV
AV cable
DX-32E250A12_11-0610_V1.book Page 12 Monday, September 26, 2011 7:58 AM