Filter
Top Products
22
Changing channel settingsDX-32E250A12
Changing channel settings
Automatically scanning for channels
When you scan for channels, your TV searches for channels with signals
and stores the channel information in the channel list. When you press
CH + or CH –, your TV goes to the next or previous channel in the
channel list.
If the TV signal source changes, for example you change from an
outdoor antenna to cable TV (no box), you need to scan for channels.
To automatically scan for channels:
1 Press MENU. The on-screen menu opens.
2 Press
or to highlight CHANNELS, then press . The
CHANNELS menu opens.
3 Press
or to highlight Auto Channel Search, then press
ENTER. The CHANNELS-Choose Your TV Source screen opens.
4 Press
or to highlight Antenna, Cable, or Cable/Satellite
Box, then press ENTER.
• If you are using an antenna for a standard or HD TV signal,
select Antenna.
• If your cable is connected directly to the TV (using no tuner
box), select Cable.
• If your cable is connected to your TV through a tuner box,
select Cable/Satellite Box.
• If you selected Antenna or Cable, your TV searches
automatically for available channels in your area and stores
the channel information in the channel list. This may take
several minutes. While searching, the TV displays a progress
report.
Or,
If you selected Cable/Satellite Box, the channel search is
not necessary.
Hiding channels
You can hide channels in the channel list. When you press CH+ or CH-,
your TV skips the hidden channels. You can still tune to a hidden
channel by pressing the number buttons for the channel.
To hide channels:
1 Press MENU. The on-screen menu opens.
2 Press
or to highlight CHANNELS, then press . The
CHANNELS menu opens.
3 Press
or to highlight Add/Skip Channels, then press
ENTER. The Channels list opens.
Menu Exit
Picture Mode
Backlight
Sharpness
Tint
Color
Brightness
Contrast
Energy Savings
+10
43
0
58
50
50
Move Select Back Exit
Adjust settings to aect picture quality
PICTURE AUDIO SETTINGS CHANNELS
Menu Exit
Auto Channel Search
Auto Zoom
Audio Only
O
On
Channel Strength
Channel Labels
Favorites
Add/Skip Channels
Move Select Back Exit
Automatically search for channels.
PICTURE AUDIO SETTINGS CHANNELS
Exit
Choose Your TV Source
Exit
Channel scan may take 20+ minutes
Setup Wizard
Cable/Satellite Box
Scanning for digital channels
Cable
Antenna
Digital Channels
Analog Channels
0
0
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
Menu Exit
Picture Mode
Backlight
Sharpness
Tint
Color
Brightness
Contrast
Energy Savings
+10
43
0
58
50
50
Move Select Back Exit
Adjust settings to aect picture quality
PICTURE AUDIO SETTINGS CHANNELS
Menu Exit
Auto Channel Search
Auto Zoom
Audio Only
O
On
Channel Strength
Channel Labels
Favorites
Add/Skip Channels
Move Select Back Exit
Manually add and skip channels in your program list
PICTURE AUDIO SETTINGS CHANNELS
Menu Exit
Move Select Back Exit
Add channels to create a favorites list
PICTURE
Ch 28-2 KCET-OC
Ch 28-4 KCET-W
Ch 11-2 WXIA-SD
Ch 10-0
Ch 28-3 KCET-Vm
Ch 35-1 WHD-TV
Ch 28-1 KCET-HD
Ch 11-1 WXIA-DT
AUDIO SETTINGS CHANNELS
DX-32E250A12_11-0610_V1.book Page 22 Monday, September 26, 2011 7:58 AM