Filter
Top Products
4
Installing the stand or wall-mount bracketDX-32E250A12
Installing the stand or
wall-mount bracket
Installing the stand
To install the stand:
1 Carefully place your TV screen face-down on a cushioned, clean
surface to protect the screen from damages and scratches.
2 Secure the stand to the screen with the four provided screws.
Installing a wall-mount bracket
To attach your TV to a wall-mount bracket:
1 Carefully place your TV screen face-down on a cushioned, clean
surface to protect the screen from damages and scratches.
2 Remove the four screws that secure the stand cover and stand to
the TV, then remove the stand cover and stand.
3 Secure the flat stand cover to the back of your TV using the four
screws you just removed.
Notes
If you plan to wall-mount your TV, do not install the
stand.
Store the stand and stand screws in case you decide
to use the stand in the future.
Model Screw type Screw length
DX-32E250A12 T4 type 25 mm
Warning
This apparatus is intended to be supported by a UL
Listed wall mount bracket.
Note
The length of the wall-mount screws vary depending
on the wall-mount bracket you purchased. See the
instructions that came with the wall-mount bracket
for screw lengths.
7.84 in. (200 mm)
3.92 in. (100) mm)
Wall mount brackets
DX-32E250A12_11-0610_V1.book Page 4 Monday, September 26, 2011 7:58 AM