Filter
Top Products
Making connections
15
DX-32E250A12
Connecting a USB flash drive
This TV does not support .JPEG or .JPG files. The USB port is for firmware
upgrades only.
To connect a USB flash drive:
• Plug a USB flash drive into the SERVICE PORT on the side of your
TV.
Connecting a basic home theater system
Using digital audio
To connect a basic home theater system using digital audio:
1 Make sure that your TV’s power cord is unplugged and the home
theater system is turned off.
2 Connect a digital optical audio cable to the DIGITAL OUTPUT
jack on the back of your TV and to the digital optical audio jack on
the digital home theater system.
Using analog audio
To connect a basic home theater system using analog audio:
1 Make sure that your TV’s power cord is unplugged and the home
theater system is turned off.
2 Connect an audio cable to the AUDIO OUT jacks on the back of
your TV and to the AUDIO IN jacks on the home theater system.
Caution
Do not remote the USB flash drive or turn off the TV
while using the USB flash drive. You may lose data or
damage the USB flash drive.
Notes
• The USB flash drive is only for firmware
upgrading.
Side of TV
USB flash
drive
Back of TV
Home t
h
eater system
Digital optical
audio cable
Back of TV
Home theater system
Analog
audio cable
DX-32E250A12_11-0610_V1.book Page 15 Monday, September 26, 2011 7:58 AM