Filter
Top Products
Adjusting the sound
21
DX-32E250A12
Adjusting the sound
Adjusting sound settings
To adjust sound settings:
1 Press MENU. The on-screen menu opens.
2 Press
or to highlight AUDIO, then press . The AUDIO menu
opens.
3 Press
or to highlight an option, then press or to adjust
the option. You can select:
• Sound Mode—Selects the audio mode. You can select
Movie, Music, News, Standard, or Custom.
• Treble—Adjusts the high sounds.
• Bass—Adjusts the low sounds.
• Balance—Adjusts the balance between the left and right
audio channels.
• Auto Volume—Automatically adjusts volume to be
consistent across programs and channels.
• Digital Audio/SPDIF—Sends digital audio to an external
audio system. You can select PCM (to select to output audio
in 2-channel stereo), or RAW (to pass through the original
digital audio sound).
• Audio Language—(Digital channels only) Selects an
alternate audio language, if available.
• MTS/SAP—(Analog channels only) Selects the audio mode.
You can select:
• Mono—Select this option if there is noise or static on
weak stereo broadcasts.
• Stereo—Select this option for programs broadcast in
stereo.
• SAP—Select this option to listen to a secondary audio
program, if available.
• Reset Audio Settings— Resets all audio settings to
factory defaults.
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.
Playing TV audio only
You can turn off the picture on your TV and listen to the program audio
only.
To play TV audio only:
1 Press MENU. The on-screen menu opens.
2 Press
or to highlight CHANNELS, then press . The
CHANNELS menu opens.
3 Press
or to highlight Audio Only, then press ENTER.
4 Press
or to select On.
5 Press MENU to return to the previous menu, or press EXIT to
close the menu. The picture turns off in approximately 3 to 5
seconds.
Note
You can also press MTS/SAP one or more times to
select the audio mode.
Menu Exit
Picture Mode
Backlight
Sharpness
Tint
Color
Brightness
Contrast
Energy Savings
+10
43
0
58
50
50
Move Select Back Exit
Adjust settings to aect picture quality
PICTURE AUDIO SETTINGS CHANNELS
Menu Exit
Sound Mode
Audio Language
Digital Audio/SPDIF
Auto Volume
Balance
Bass
Treble
Standard
O
PCM
0
32
32
Move Select Back Exit
Adjust settings to aect sound quality
PICTURE AUDIO SETTINGS CHANNELS
Notes
• Audio Only works only when the input source is
TV and your TV is receiving a broadcast signal.
• To exit Audio Only mode, press any button.
When you exit Audio Only mode, the Audio
Only option is automatically reset to Off.
Menu Exit
Picture Mode
Backlight
Sharpness
Tint
Color
Brightness
Contrast
Energy Savings
+10
43
0
58
50
50
Move Select Back Exit
Adjust settings to aect picture quality
PICTURE AUDIO SETTINGS CHANNELS
Menu Exit
Auto Channel Search
Auto Zoom
Audio Only
O
On
Channel Strength
Channel Labels
Favorites
Add/Skip Channels
Move Select Back Exit
Adjust channel options
PICTURE AUDIO SETTINGS CHANNELS
DX-32E250A12_11-0610_V1.book Page 21 Monday, September 26, 2011 7:58 AM