Filter
Top Products
Making connections
9
DX-32L200NA14
Using component video (better)
To connect a cable or satellite box using component
video:
1 Make sure that your TV’s power cord is unplugged,
and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect a component video cable (not provided) to
the VIDEO/Y, P
B, and PR video jacks on the side of
your TV and the component video out jacks on the
cable or satellite box.
4 Connect an audio cable (not provided) to the
AV IN AUDIO L/R jacks on the side of your TV and to
the audio out jacks on the cable or satellite TV box.
5 Plug your TV’s power cord into a power outlet, turn
on your TV, then turn on the cable or satellite box.
6 Press INPUT to open the INPUT SOURCE list.
7 Press or to highlight COMP/AV then press
ENTER.
Using composite video (good)
To connect a cable or satellite box using composite
video:
1 Make sure that your TV’s power cord is unplugged,
and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the VIDEO/Y
jack and AV IN AUDIO L/R jacks on the side of your
TV and to the composite video and audio out jacks
on the cable or satellite box.
4 Plug your TV’s power cord into a power outlet, turn
on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to highlight COMP/AV then press
ENTER.
Note
•The VIDEO/Y, PB, and PR video jacks (used to
connect a component device) share the
AV IN AUDIO L/R jacks with the VIDEO/Y jack
(used to connect a composite device).
• When you connect the audio using the
AV IN AUDIO L/R jacks, the audio output is
analog.
Side of TV
Component video cable
Audio cable
Cable or satellite box
Cables are often
color-coded to match
color-coded jacks.
75 Ohm coaxial cable
Note
•The VIDEO/Y, PB, and PR video jacks (used to
connect a component device) share
AV IN AUDIO L/R jacks with the VIDEO/Y jack
(used to connect a composite device).
• When you connect the audio using the
AV IN AUDIO L/R jacks, the audio output is
analog.
Side of TV
Cable or satellite box
Composite cable
Cables are often color-coded to match color-coded jacks.
Note: The yellow video connector on the AV cable connects to the green VIDEO/Y jack.
75 Ohm coaxial cable