Filter
Top Products
Making connections
11
DX-32L200NA14
Connecting a DVD or Blu-ray player
Using HDMI (best)
To connect a DVD or Blu-ray player using HDMI:
1 Make sure that your TV’s power cord is unplugged
and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to the HDMI
jack on the side of your TV and to the HDMI OUT
jack on the DVD or Blu-ray player.
3 Plug your TV’s power cord into a power outlet, then
turn on your TV.
4 Turn on the DVD or Blu-ray player, then set it to the
correct output mode. For more information, see the
documentation that came with the player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to highlight HDMI1, HDMI2, or HDMI3,
then press ENTER.
Using DVI (same as HDMI but requires an audio
connection)
To connect a DVD or Blu-ray player using DVI:
1 Make sure that your TV’s power cord is unplugged
and the DVD or Blu-ray player is turned off.
2 Connect an HDMI-DVI adapter (not provided) to one
end of an HDMI cable (not provided), then connect
the adapter to the DVI OUT jack on the DVD or
Blu-ray player.
3 Connect the other end of the cable to the
HDMI1/DVI jack on the side of your TV.
4 Connect a 3.5mm audio cable (not provided) to the
PC/DVI AUDIO IN jack on the side of your TV and to
the AUDIO OUT jacks on the DVD or Blu-ray player.
5 Plug your TV’s power cord into a power outlet, then
turn on your TV.
6 Turn on the DVD or Blu-ray player, then set it to the
correct output mode. For more information, see the
documentation that came with the player.
7 Press INPUT to open the INPUT SOURCE list.
8 Press or to select HDMI1, then press ENTER.
Side of TV
DVD or Blu-ray player
HDMI cable
Note
You must use the HDMI 1/DVI jack to connect a DVD
or Blu-ray player using DVI. If you use another HDMI
jack, you will not hear sound from the TV speakers.
Note
When you connect the audio using the PC/DVI
AUDIO IN jack, the audio is analog.
Side of TV
DVD or Blu-ray player
HDMI cable with DVI adapter
3.5 mm audio cable