Filter
Top Products
Flow-through chamber meter installationFigure 2-4:
A
A. Optional temperature port
Note
• This flow-through chamber is a direct-insertion type chamber that does not have a thermowell and
uses a ¾-inch Swagelok connection.
• The three compression fittings on the flow pockets (½-inch drain, ¾-inch temperature probe, and 1-½-
inch mounting nut for the meter) are rated to above the working pressure of the flow pocket. The
fittings may be Swagelok or Parker.
2.5 Mount in an open tank (long-stem meter)
CAUTION!
Only the safe area version of the long-stem meter can be mounted in an open tank.
Procedure
1. Clamp the long-stem meter to a structure, positioning the clamp to determine the
insertion depth of the meter.
Mounting
16 Micro Motion Fork Viscosity Meter